Accessories for EasyLap™ panel
HardieDrive® Screws
Class 3 self-tapping wing-tipped screw for fastening to 0.8mm to 1.6mm BMT lightgauge steel frames.
Length: 32mm SAP: 305532 Selling unit: 500 per box
Length: 40mm SAP: 305533 Selling unit: 500 per box
James Hardie™ 50mm wide Foam Back Sealing Tape
A self-adhesive foam tape to help improve water tightness with EasyLap™ panel and Scyon™ Axon™ cladding. It is applied under sheet joins to the vapour permeable membrane along the stud face.
Length: 25metres SAP: 304560 Selling Unit: 1 each
James Hardie™ Joint Sealant*
A general purpose, paintable, exterior grade polyurethane joint sealant.
300ml cartridge SAP: 305534 Selling Unit: 20 per box
*Not to be used in fire applications.
James Hardie™ 75x75mm Colorbond® Corner Flashing
A Colorbond® corner flashing for use behind cladding at internal and external corners.
Length: 3,000mm SAP: 305564 Selling Unit: 5 per pack
HardieBlade™ Saw Blade
A poly-diamond blade for fast and clean cutting of James Hardie fibre cement
Length: 185mm SAP: 300660 Selling Unit: 1 each
Length: 254mm SAP: 303375 Selling Unit: 1 each
James Hardie™ 9mm Aluminium External Corner
A ready to paint aluminium extrusion, to be used with EasyLap™ panel and Scyon™ Axon™ cladding, at external corner junctions to conceal the board edge.
Length: 3,000mm SAP: 305521 Selling Unit: 5 per pack
James Hardie™ 9mm Aluminium Internal Corner
A ready to paint aluminium extrusion, to be used with EasyLap™ panel and Scyon™ Axon™ cladding, at internal corner junctions to conceal the board edge.
Length: 3,000mm SAP: 305520 Selling Unit: 5 per pack
James Hardie™ Score and Snap Knife
A tungsten tipped knife for scoring fibre cement sheets.
SAP: 305576 Selling Unit: 20 per box
James Hardie™ 9mm Aluminium Horizontal h Flashing
A ready to paint aluminium horizontal flashing, to be used with EasyLap™ panel and Scyon™ Axon™ cladding, for horizontal control joints.
Length: 3000mm long SAP: 305613 Selling Unit: 5 per pack
James Hardie™ 9mm Aluminium Horizontal h Jointer
A ready to paint aluminium jointer, used to join the James Hardie™ 9mm Aluminium Horizontal h Flashing.
Length: 100mm SAP: 305614 Selling Unit: 10 per bag
James Hardie™ Aluminium Snap On Corner. 3,000mm long (2 pieces per set).
A ready to paint aluminium extrusion set, to be used with Scyon™ Axon™ cladding, HardiePlank™ weatherboard and PrimeLine® weatherboard, at internal and external corner junctions to conceal the board edge.
Length: 3,000mm SAP: 305513 Selling Unit: 5 sets per pack
Required accessory supplied by James Hardie
James Hardie™ Fibreshears
Electric tool for cutting fibre cement sheets.
SAP: 300653 Selling Unit: 1 each